In the operation manual of the CNC spinning machine, the CNC spinning machine selects metal plastic processing, combines the technological features of casting, extrusion, stretching, bending, rolling, rolling and rolling, and completes the features of non-cutting processing. The CNC spinning machine selects high quality and efficient spinning process of metal products. Strong rotation is a rapidly developing process since the 1950s.

This molding skill has the advantages of good deformation condition, good product performance, small scale public service, high material usage rate, wide product scale and so on, and can process the whole seamless hollow rolling parts.

CNC metal rotation important: you should know where the emergency stop button switch is located so that you can press it as needed, and it is necessary to close the machine before placing the fuse. There is enough space to avoid risk. Water or oil may cause the ground to slip and lead to risk. In order to avoid the incident, the work site should be kept clean and dry.

Risk: control equipment, transformer, motor, junction box, high voltage terminal and other live parts should not be touched by hand (or not insulated), otherwise electric shock will be caused. Do not touch the switch with wet hands, or it may cause electric shock.

Make sure you don't make mistakes and don't touch the switch before you use it. If a mission is performed by more than two people, then in each operation we know that the CNC spinning machine is equipped with a lot of safety equipment to avoid damage and damage to operators and equipment.

Operating principle of CNC spinning:

The spinning machine is used for metal spinning process and making thin wall hollow rotating parts of plastic processing equipment. Extensive processing scale, small diameter only a few millimeters, the largest nearly 10 meters.

The spinning machine is generally composed of the main body, spindle box, wheel seat and tail seat. During the spinning process, the blank (plate or ring) is clamped onto the mold for rotating motion, and the rotary press presses the blank to deform point by point and become the workpiece.